https://blinkenhub.com/docs/ Recent content in Docs on Blinkenhub Hugo en-US Mon, 02 Nov 2026 00:00:00 +0000 https://blinkenhub.com/docs/build-the-kit/ Mon, 02 Nov 2026 00:00:00 +0000 https://blinkenhub.com/docs/build-the-kit/ <p>The Blinkenhub kit includes all the internal parts. You print the stand on your own 3D printer, fit the parts inside, and end up with the same stand, hub, and lights as an assembled Blinkenhub, in any color you like.</p> <aside class="callout callout-note" role="note"> <p class="callout-title">Note</p> <p>Print time will vary depending on factors such as the printer, the material used, and the print settings. As a general rule of thumb it should take about two hours to print and assemble Blinkenhub.</p> https://blinkenhub.com/docs/faq/ Mon, 01 Jan 0001 00:00:00 +0000 https://blinkenhub.com/docs/faq/ <h2 id="blinkenhub">Blinkenhub</h2> <details class="faq" id="which-mac-mini-does-blinkenhub-fit"> <summary>Which Mac mini does Blinkenhub fit?</summary> <div class="faq-answer"> <p>Mac mini (November 2024 and later). The stand follows the rounded-square footprint of that model exactly, so the two look like one piece.</p> </div> </details> <details class="faq" id="how-does-it-connect-to-my-mac"> <summary>How does it connect to my Mac?</summary> <div class="faq-answer"> <p>With a single USB connection. That one cable powers the hub and the lights, and carries the data for both.</p> </div> </details> <details class="faq" id="what-can-i-plug-into-the-usb-ports"> <summary>What can I plug into the USB ports?</summary> <div class="faq-answer"> <p>Blinkenhub adds two USB-A ports to the back of the stand, right below the Mac&rsquo;s own. They run at High Speed USB 2 (480 Mb/s), which makes them a good fit for keyboards, mice, security keys, dongles, and anything else that needs an old-school USB connection.</p>